Hedge Trimmer Extension Bar – 40″ Long


Auger Torque Hedge Trimmer Extension Bar – 40″ Long

Add another 40″ of cutting length to the T150 hedge trimmer with the bolt on extension bar.

SKU: 51-8903-100-01-2 Categories: , , Tag: Manufacturer:


Hedge Trimmer Extension Bar for T150 Hedge Trimmer from Auger Torque

The Auger Torque Hedge Trimmer Extension is an additional extra for the standard hedge trimmer sickle bar that adds an extra 40″ of cutting length. The standard hedge trimmer cutting bar is 5ft and with the extension you can have over 8ft of cutting length in total.

This is sure to make trimming more precise, efficient and will provide yet another way to expand the versatility of existing machines.

The extension bar easily bolts on to the existing bar and can be ordered separately.

We recommend at least 11GPM of oil flow in order for the hedge trimmer and extension bar to work properly. Machines with less the 11GPM oil flow should not run the hedge trimmer with an extension bar.

If you have a special attachment inquiry or are unsure of your  machine’s compatibility with a particular attachment, please do not hesitate to contact us on (941) 212-0037.

Auger Torque provide a LIFETIME parts replacement warranty on the dislodgement of the Earth Drill shaft and any failure of the Shock Lock system to prevent loss of teeth under normal operating conditions.

All Auger Torque products are warranted to be free from defects in materials or workmanship for the periods summarized below:

  • Planetary Gearbox Components – 72 Months
  • Hydraulic Motors – 36 Months
  • All Other Parts / Products – 24 Months

For any additional information on the Auger Torque range, you can visit their website here!

Frequently Asked Questions

How does the hedge trimmer work?

Using the hydraulics from your excavator – the hedge trimmer motor spins a crank that slides the cutting teeth of the trimmer back and forth to cut branches up to 1.5″

What machines can I run the sickle bar on? 

Any excavator from 1.5 to 8 tons with a 2 way hydraulic circuit for running attachments, can run the hedge trimmer attachment.

How does the bar mount on my machine?

We will custom build a mount to suit your excavators pin diameters, pin centers and dipper stick width.

Are there any replaceable parts on the hedge trimmer? 

Teeth and jaws are commonly replaceable parts. Hydraulic motors and cranks can be replaced, but are not prone to problems.

How does the extension attach to the trimmer bar? 

The extension bolts onto the trimmer bar itself.

If you can’t find the answer to your question, contact us below!

    Additional information

    Machine Size

    5,000Lbs – 10,000Lbs Excavator, 10,000Lbs – 18,000Lbs Excavator

    Mounting Options

    No Mount (Bar Only), Excavator Mount (Built to Order)

    40" Extension Bar

    No, Yes


    There are no reviews yet.

    Be the first to review “Hedge Trimmer Extension Bar – 40″ Long”

    Your email address will not be published. Required fields are marked *

    Q & A

    There are no questions yet

    Ask a question

    Your question will be answered by a store representative or other customers.

    Thank you for the question!

    Your question has been received and will be answered soon. Please do not submit the same question again.



    An error occurred when saving your question. Please report it to the website administrator. Additional information:

    Add an answer

    Thank you for the answer!

    Your answer has been received and will be published soon. Please do not submit the same answer again.



    An error occurred when saving your answer. Please report it to the website administrator. Additional information: