Excavator Log Splitter Package Deal for Excavators up to 10 tons!
This excavator log splitter package comes with 6000-40 hydraulic drive, excavator mount, hoses & couplers and our 300mm (12″) log splitter auger cone!
Our Excavator Log Splitter Package gives you the best deal on the market for a log splitter setup. If you have a special attachment inquiry or are unsure of your machine’s compatibility with a particular attachment, please do not hesitate to contact us on (941) 212-0037.
Torque Range: 2,004 – 6,012 ft-lb
Oil Pressure Range: 1160 – 3,481 psi
Oil Flow Range: 19 – 40 GPM
Speed Range: 33 – 70 rpm
Unit Height: 31 in.
Unit Diameter: 11 in.
Unit Weight: 260 lbs
Hitch Options: Single Pin Hitch
Double Pin Cradle Hitch (recommended)
Double Pin Hitches are built to suit the machine’s pin dimensions. These can be manually pinned to the machine or picked up by a coupler.
We also can build machine specific “quick connect” mounts for Kubota, John Deere, Bobcat etc. These are to suit the specific machine make & model.
Output Shaft Standard: 2.5 in. Hex
Package Deal includes the following:
6000-40 Auger Drive for Excavators with Double Pin Cradle Mount, Log Splitter Cone Attachment, Hoses and Quick Release Flat Face Couplers
Please note that the lead time to build the mount to suit your excavator is usually 2 to 3 weeks.
Suitable Excavators for this 6000-40 package (as a guideline):
Bobcat E60, E88
CASE CX50, 80
CAT 305, 308
JCB 55z, 85z
John Deere 50G, 85G
Komatsu PC55, PC88
Kubota U50, U55
Sany SY50, 80
Takeuchi TB175, 260, 280
Volvo ECR55, 88
Yanmar ViO55, 80
Forged Hood & Ears
Auger drives take up a lot of stress in certain areas, especially the hood and ears on top of the unit. These are forged pieces to endure the strain of drilling. Hood pins are also locked into place to ensure they never detach from the auger drive.
Hose & Coupler Options
All of our S4 auger drives (2” hex) come with high quality hoses and couplers included.
Larger auger drive units come with hoses to match the motor size of the unit.
6000-40 (2.5” hex) drive come with ¾” hoses
11000-45 to 18500-45 (3” square) drives come with 1” hoses.
Auger Torque manufactures their own planetary gearbox. The unique design features the non-dislodgement shaft design, and maximizes the final output torque of the unit at the operating hydraulic pressure. Manufacturing their own gearbox allows Auger Torque to maintain high quality and reliability that you depend on for your attachments.
Non Dislodgement Shaft
One unique feature of the auger torque range
is the non-dislodgement shaft. The gearbox design
of each Auger Torque drive ensures that the output
shaft is locked in place and will NEVER fall out of the
We offer a lifetime guarantee against the shaft falling
out of your auger drive.
We provide replacement warranty units for the coverage listed below.
All Auger Torque products are warranted for the periods below:
- Planetary Gearbox Components – 72 Months
- Hydraulic Motors – 36 Months
- All Other Parts / Products – 24 Months
For any additional information on the Auger Torque range, you can visit their website here!