Excavator Hydraulic Quick Coupler from Geith
Couplers To Suit Excavators up to 25 tons!
The Attachment Company the Geith Excavator Hydraulic Quick Coupler for excavators for machines from 1 to 85 tons! Here at The Attachment Company we focus on the smaller machines up to 25 tons. For more information on the larger range of quick couplers contact us here!
Geith International are a world renowned brand for quick couplers other attachments and set the standard for quality and safety. Geith excavator couplers comply with all safety and guidelines for the European and US market – EN 474-1 & ISO 13031.
Quick Coupler Specifications
Geith Hydraulic Quick Couplers allow excavators to quickly pick up different buckets without leaving the machine. Standard hydraulic quick couplers pick up a range of pin diameters and pin center measurements. Select your quick coupler based on the excavator weights below:
|Excavator Weight (t)||Pin Diameter (mm)||Coupler Model||Coupler Weight* kg (lbs)|
|1 – 2||25 / 30||QC25-30H||40 (18)|
|2 – 4||35 / 40||QC35-40H||77 (35)|
|4 – 8||45 / 50||QC45-50H||73 (161)|
|7 – 12||50 / 55 / 60||QC50-55-60H||92 (203)|
|12 – 16||60 / 65||QC60-65H||191 (421)|
|16 – 25||70 / 80||QC70-80H||327 (721)|
Each coupler picks up a range of pin centers, while the top hitch assembly is built to suit your machine pin dimensions. This means you get a tight fit, with no slop, on the machine, while you also are able to pick up a large range of buckets.
Machine Requirements & Coupler Installation
Hydraulic Coupler Circuit
The coupler requires a hydraulic coupler circuit to open/close the coupler just like a standard hydraulic coupler.
If your machine doesn’t have an existing coupler circuit you will need the additional hydraulic install kit. This includes hydraulic lines, solenoid and control box for the cab to operate the coupler. For more information you can download the coupler operators and installation manual below.
The basic steps of the coupler install are as follows:
– Pin the coupler onto the machine.
– Run hoses from the coupler to the supplied control block that mounts onto the dipper/stick of the machine.
– Run hoses from the stick all the way back to the hydraulic pump housing compartment.
– Secure the hydraulic solenoid to a suitable location.
– Use T fittings to tap into the bucket cylinder circuit of the machine and connect hoses to the solenoid as instructed by the manual.
– Mount the control box in the cab and connect to the solenoid and power source.
The Attachment Company and Geith can assist with installation instructions remotely if needed.
Quick Coupler Features
Coupler Front & Rear Pin Lock
Hydraulic quick couplers from Geith feature front pin lock as well as the standard rear pin locking mechanism. Front pin locking ensures no dropping of the bucket when the rear lock isn’t properly engaged and is required to meet European safety standards.
The front pin is spring loaded in place incase the rear pin is not properly locked the bucket won’t drop from the coupler. The main coupler rear lock is operated by a hydraulic cylinder. Also held in by two heavy duty springs, incase of cylinder failure.
Hydraulic Coupler Control Kits/Installation
With many years of experience in the heavy equipment industry and manufacturing quick couplers, Geith has gathered information on machine electrics and hydraulics.
Each Geith Quick Coupler comes with a tailored control/fitting kit with hydraulic valve, hoses & electronic control box to install the quick coupler on your machine. This allows you to install the coupler on an excavator with no quick coupler hydraulic circuit. The hydraulics will utilize the bucket cylinder circuit to operate the couplers hydraulic cylinder.
Installation guides are provided specifically for your excavator to ensure a simple installation. If you require any support with your installation please contact us or Geith directly, here.
Geith Hydraulic Couplers are manufactured in Ireland using high strength steel and high quality welds. Geith set the standard for quick couplers worldwide with world class manufacturing and years of in the heavy equipment industry.
Quick Coupler Safety
Geith couplers are only opened with the bucket/attachment fully curled in, to ensure that the attachment is only released in the safest position. The hydraulic configuration of the coupler control system, provides hydraulic oil to open the coupler, from the bucket cylinder circuit.
The Attachment Company only offers attachments from established manufacturers to ensure the satisfaction for our customers!
Your Geith Quick Coupler is covered under an extensive 4 year warranty by The Attachment Company. This warranty covers all manufacturing defects and all components. Contact us, for more information on the our warranty process.
There are no reviews yet.