Skid Steer Auger Cement Mixer Bowl Package
Swap your auger bit for the mixing bowl when you have finished drilling fence post holes and start mixing up your concrete for backfilling, with our mixing bowl for 2” hex auger drives.
Package includes 3300-30 auger drive, 1/2″ hoses and couplers, universal skid steer mount with mixer bowl cradle and 2″ hex mixer bowl.
Ideal for fencing contractors, with the aid of the Mixer Cradle the auger can be quickly removed and the Mixer Bowl attached and locked in place with the standard Auger Pin. After the concrete has been laid, the Auger can be replaced for the next post.
Mixer Bowl Specifications
Auger Drive Compatibility: Drives from X1100-13 up to 6000-40
Bowl Capacity: 48 gallons (180 Liters)
Unit Depth: 27″ / 690mm
Unit Diameter: 28.5″ / 724mm
Unit Weight: 75lbs
3300-30 (Standard Flow) Skid Steer Auger Drive Specifications
3300-30 Suits standard flow skid steers with up to 30GPM!
Torque Range: 1,106 – 3,318ft-lb
Oil Pressure Range: 1,160 – 3,481 psi
Output Shaft: 2″ Hex (US Standard)
Oil Flow Range: 13 – 30GPM
Speed Range: 42 – 97 RPM
Unit Height: 26 in.
Unit Diameter: 10 in.
Unit Weight: 166lbs – 277lbs w/ skid steer mount
Skid Steer Mixer Bowl Cradle
The auger mixing bowl cradle holds the drive up at a 45 degree angle to allow you to fill the mixer bowl and then use the machine to tip out the cement when ready to pour.
The mixer bowl cradle is different to a standard auger cradle that holds the auger bit downwards for drilling into the ground. However the mixer bowl cradle can be mounted to our frame along side you standard auger cradle.
We provide replacement warranty units for the coverage listed below.
All Auger Torque products are warranted for the periods below:
Planetary Gearbox Components – 72 Months
Hydraulic Motors – 36 Months
All Other Parts / Products – 24 Months
For any additional information on the Auger Torque range, you can visit their website here!